Sensor for electronic leak detector hydrogen('007950025820)

  • Sensor for electronic leak detector hydrogen('007950025820)
  • Sensor for electronic leak detector hydrogen('007950025820)
Producer: Magneti Marelli
Product code: 007950027010
kod FCA: 59270776
status_iconProduct available on request

The sensor for the electronic leak detector Hydrogen is an instrument that allows for precise control of the tightness in the air conditioning systems of both car and stationary systems using different types of refrigerants. To perform the system diagnostics, a hydrogenem cylinder containing a hydrogen (5%) and nitrogen (95%) mixture is required. An action for leak detection can be performed as in the case of pure nitrogen by filling the system with a mixture contained in the cylinder, while regulating the pressure level in the system with the appropriate regulator. This type of process is called a pressure test. The use of Hydrogenem provides better results than pure nitrogen because of the composition of the mixture, which contains the smallest hydrogen molecules, significantly mniejszcze than the refrigerant or nitrogen, which provides very good effectiveness Detectable leaks penetrate through gaps of even microscopic sizes. An additional advantage of hydrogen is its low weight property and thus it is lighter than air floats which allows to cover the whole system test. The tester that is attached to the set is moved along the system and the tip equipped with a properly sensitive detector records even the smallest leakage density in the form of Hydrogenu and, based on the results, you can determine the size of the leak in the system Air conditioning.

The advantages of Wyrywacza include:
• Ease of use, which is assured by the lack of dismantling of the components of the system
• Pressure tests, which, thanks to the compact design and the technique of carrying out the test method, allow to perform diagnostics as in the case of normal operation of the air conditioning system
• No environmental burden, which allows the system to be tested for leaks using our equipment, allowing to maintain all safety standards for environmental protection by non-use during the R134a test Unlike a UV dye method that requires the use of a refrigerant test
• Economics, which is assured by the low cost of a gas mixture in the form of Hydrogenu
• Compliance with the law F-gas, which places the workshop requirements on the methodology for the use of refrigerants while maintaining safety measures for environmental protection
• Precision, which provides very accurate locating of the leakage by means of a detector constituting the element of the concentration-sensing tester
• Accuracy, which allows to locate even the slightest leakage, where the error in the amount of detected refrigerant does not exceed 2g/year

The set includes:
• Electronic leak detector
• User manual
• Batteries (4 pcs.)
• Carrying Case

Technical data:
• Measurement accuracy up to 5ppm which corresponds to high tolerance (2g/year), mean (15g/year), Low (30g/year)
• Battery charge indicator
• Means of communication of leakages via a bar indicator with LEDs emitting light in three component colours and an audible signal
• Cable length 40 cm (15.5 ")
• Dimensions (173x66x56 mm
• Weight (~ 400g)
• Temperature at rest from-10̊C to 60 ̊c
• Humidity tolerance at rest up to 70% (relative humidity)
• Operating temperature from 0̊C to 40 ̊c
• Operating humidity tolerance up to 80% (relative humidity)
• Electronic probe with flexible design
• Recorded by a gauze detector, this Hydrogen (95% nitrogen and 5% hydrogen)
• Power supply in the form of 4 AA alkaline batteries (DC 6v)
• Kit containing 4 batteries (AA), operating manual, suitcase for storing the parts of the kit.
• Battery life allows for approx. 7 hours of operation
• Power off in automatic mode after 10 minutes with the option of pressing and holding the "Hi" button and turning on the "on" button on the tester
• Ready-to-work time oscillates in 45 seconds
• Working conditions for use up to 2000 ASL

Users reviews
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
Question:
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
Zamknij
Jplayer
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel